Wood Auger Drill Bits, carbide tipped wood augers, heavy duty carbide wood augers, Auger Drill Bits Manufactured 184 inch lengths.Custom Manufactured through hardened 4140 steel,c-4 carbide inserts- L-screw pilots, hex 1/2 inch, 5/8 inch shanks. Wood augers totally refurbishable.

"Power Plus Annihilator"
The most powerful heavy duty
CARBIDE TIPPED AUGERS
1/2" * 9/16" * 11/16" * 13/16" * 15/16" * 1" *
1-1/16" * 1-1/8 * 1-1/4 * 1-3/8 * 1-1/2 *
* 1-5/8 * 1-3/4 * up to 4"diameters.
12" up to 144" plus lengths
wood auger drills for timbers, railroad ties, glu-lam,bridge construction and more

carbide tipped wood auger bits
with hardened spur.
sizes available
Best for:
Soft or hard woods, fiberglass, composites, heavy green woods, forestry, Home Builders,
Timber Framing, Glue lam, Truss Construction, Treated Woods, Boat Building,
Sea Wall Construction, Underwater Construction, Utility poles, Landscaping,
Wood Bridge Construction. Heavy Equipment, Wood Matt Construction,
and more. No run-out or wandering.
Clean Entry & Exits!
CAN BE USED WITH
ELECTRIC, AIR ,GAS POWERED DRILL MOTORS.
CAN BE COMPLETELY REBUILT!
Socket, SDS, Spline
& Standard Shanks!

The Power Plus Annihilator
will out-perform all other drills!
7/16", 5/8", Hex Shanks,
3/4 (Round),1, 1-1/4-7 (socket, SDS, or spline)

Custom diameters and lengths
made for your needs.
utillity pole wood bits

The Annihilators are carbide tipped wood drill bits that have a carbide-tipped
cutting tip combined with a hardened steel cutting edge.
This allows the Annihilator carbide tipped
wood drill bits to bore holes in all types of wood quickly,
leaving little or no residue. A truly clean, smooth hole is produced.
The carbide tipped wood drill bits requires less torque to operate
and can be used with electric, air, or gasoline powered drill motors and impact wrenches. The carbide cutter is brazed onto the steel body and the hardened steel cutting edge
can be sharpened. The lead screw, shank, and carbide cutter are replaceable
allowing thee Annihilator carbide tipped wood drill bits to be completely rebuilt.

Carbide Tip Counter Bore Diameters
7/16 * 5/8 * 3/4 * 1-1/4 * 1-1/2 *
2 * 2-1/2 * 3 * 3-1/2
Hex or round Shanks,
1/2, 5/8, 3/4, (Round), (socket, SDS, or spline)
special custom sizes made for your applications!
carbide counter bores and bits for timber bits

carbide counter bores and bits for timber bits

4-1/2 Diameter
custom carbide counter sink
(below)

carbide counter sinks - tools � counter bore

"Marine Shark bits"
Call for price.
marine underwater drills

hand brace bits / ship auger / pole bits
electricians bits / utility bits
Standard High Speed Steel
All styles of augers.
Single spur, double spur, bare foot and more,
available in all sizes and lengths.
Call us for pricing and availability.
high speed steel wood drills

7 pc. Auger Bit Set, 6 1/2"length 5/8",3/4",7/8",1",1 1/8",1 1/4",1 3/8"
7 pc. Auger Bit Set, 9" long 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1"
7 pc. Auger Bit Set, 18" long. 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1"

Individual augers from 3/8 to 2"

Turf Drills
For golf courses, sports stadiums, landscaping.
specially manufactured for each need.

Marine
( under water):
Coring and drilling bits

Ice and Snow drills

Pneumatic Drill Motors
2" capacity Reversible
LIST-$5889.90
prices cannot be advertised, Call for substantial discount.

Ideal for drilling wood in marine timbers, underwater use and railroad repair work
Thrust bearing support for long life and efficient operation
Lever throttle and durable spur gearing
Breast plate and dead handle included
Includes threaded exhaust port
Use underwater with Air Tool Line Conditioner
Pneumatic Drill Motors
2" capacity Reversible

prices cannot be advertised, Call for substantial discount.
Model ADV-1924 - Variable Speed (speed control dial)
Capacity in wood: 2" Diameter
Reversible: Yes
Power: 3 HP
Chuck Style: 1/2" Wood boring
Spindle: #2 Morse Taper
Free Speed: 700 RPM
Recommended Hose Size: 1/2"
Overall Height: 18-1/2"
Weight: 24-3/4 lbs.
Air Inlet Thread: 1/2" ID
Air Exhaust Thread : 1/2" NPT
Air Consumption at 90 PSI : 50 CFM

Model ADV-1932
with self-closing roll throttle
Up to 3" for boring wood
LIST-$7425.60

Model adv- 1932
with self-closing roll throttle
Up to 3" for boring wood

Drill Drives and Power Drives
Model No.'s:
(with Torque Control)
These powerful 16 AMP motors have high torque output. They feature variable speed in two changeable gear ratios.
They are reversible and include a mechanical safety clutch.
Model also includes electronic torque control which can be set at a value that prevents overloading
or over-rolling for tube applications. The motor automatically shuts off at the torque value preset by the operator.
These motors are ideal for many jobs that require portable power drives or drill motors.
Available Accessories include Morse Taper adaptors with a male square drive in sizes 1/2", 3/4" and 1".

"Ultimate Aggressor "
Heavy Duty
CARBIDE TIPPED
Wood Auger!
utillity pole wood auger drills, timber, carbide tip,

Sizes Available
Power wood auger flute design
gives the Ultimate Aggressor the ability
to drill faster than ordinary steel augers.
Milled from a solid piece of 4140 steel.
Because of it's rugged construction
and tip design.
The Ultimate Aggressor is able to accept
the high torque and high R.P.M.LOADS. loads
generated by today's most powerful
drills & impact wrenches.

* 9/16" * 11/16" * 13/16" * 15/16" *1" *
* 1-1/16" * 1-1/8" 1-1/4" * 1-3/8" * 1-1/2"
1-5/8* 1-3/4* up to 10 "diameters,
and up to 144" plus lengths

For treated or green lumber.
boat building, utility pole drilling,
log home construction.

Special diameters and lengths
custom mfg. for your needs!
These drills are manufactured
in long lengths and large sizes.

Socket, SDS, Splined,
Threaded Hex & standard Shanks

The unique power auger flute design and the exclusive carbide tip
incorporated into the design of the Aggressor carbide tipped
wood drill bits, allows them to drill faster than ordinary steel auger bits.
The Aggressor carbide tipped wood drill bits are milled
from a solid bar of steel to make it tougher and stronger
than most conventional wood drilling bits.
These are truly long lasting, heavy-duty carbide tipped wood drill bits
that are able to accept the high torque load and high R.P.M.LOADS. level
generated by the most powerful impact wrenches and drill motors.
Hydraulic tools like the Stanley ID-04 �Yellow Jacket� impact wrench, the Racine HIW-716and the Fairmount H8508 impact wrench will provide improved hole drilling performance when used with the Aggressor carbide tipped wood drill bits. The Aggressor carbide tipped wood drill bits also works well in heavy-duty electric, pneumatic, and gas powered drills. The Aggressor carbide tipped wood drill bits
are fully reversible, and come in standard diameters
from 9/16� up to 1-1/8�,and in standard lengths from 12� to 48�.
The shank is a standard 7/16� or 5/8� hex,
but can be customized to fit most power tools.

(Tie Bits)
Wood Railroad Tie Auger Bits
Carbide Tipped
for railroad ties and heavy wood
Diameters
7/16"* 1/2" * 9/16" * 5/8"
11/16" * 3/4" * 13/16"
Lengths
9-1/2" * 12" * 18" standard.
Socket, SDS, Spline & Standard Shanks!

Optional Tip
Special sizes made!

For Railroad Ties and heavy timbers
Carbide-tipped Railroad Tie bits are especially designed for drilling
all types of wooden railroad ties, cross-ties, and pressure treated lumber.
These Railroad tie bits offers rapid chip evacuation due to
special fluting that provides a large chip storage area and prevents clogging.
The high quality carbide tip, available in a spear point (90�) design
will drill into the hardest of woods.
Simple put our Railroad Tie Bits are designed for drilling railroad ties.

Ideal for drilling railroad cross ties, landscape timbers,
marine piles, and thick salt treated posts.
Features a razor sharp carbide edge on a single spiral hollow flute bit
that will cut quickly and cleanly effectively removing cutting debris. The design also prevents thermal buildup thus preventing melting of the work surface.
The RAZOR can be sharpened and completely rebuilt if necessary.
The unique point geometry and hollow flute design is self feeding without
the aid of a lead screw. The RAILROAD TIE BORE BIT makes an excellent
exit hole while keeping blowout to a minimum.
The RAILROAD TIE BORE BIT can be provided with various shank configurations,
the most common is the 1/2" Round Shank with 0, 1 or 3 flats.
This allows the drill bit to be chucked into a �" Jacobs Chuck or larger drill.
Made from high quality American tools steel on precision CNC grinders.
A "must have" for any job that requires a through hole in a thick timber of spikes or bolts. sold in production units only.
min(250 pc)

Timber Wood Auger

30" and 40 Lengths only.
From 9/16 to 1-1/2 Diameters.
Custom Carbide Counter Sinks Custom manufactured. large hole counter bores.
any diameter or depth.

FIRE STORM WOOD AUGER
Fire Storm double spur for general purpose
medium to heavy duty use!
Sizes Available

Diameters:
* 9/16 * 11/16 * 13/16 * 15/16 * 1-1/16
Lengths
12 * 18 * 24 * 36 * 48
shanks 7/16 hex or 5/8 hex
special sizes and lengths available on request.

The FIRE STORM carbide tipped drill bits
are general purpose bits, medium to heavy-duty auger style
wood boring pole bit.
These wood drill bits are milled from a single piece
of steel creating a solid center and a truly unique flute design.
This combination enables these carbide
tipped wood drill bits to outperform and out last any ordinary
steel auger pole bits.
The FIRE STORM features a patented double spur,
carbide tip drill bit configuration and proven power-auger flute design.
These carbide tipped drill bits are designed to produce numerous
straight holes and is self-feeding The FIRE STORM works equally
well with newer hydraulic power tools that utilize a high torque,
high R. P. M. design, or with older hydraulic tools that may develop
slightly less torque and speed. FIRE STORM carbide tipped wood drill bits
can also be used with most heavy-duty electric, pneumatic, or
gasoline powered drill motors or impact wrenches rated
at 1/2" capacity or larger. Do not use reverse drilling when removing,
the FIRE STORM is NOT a reversible bit. FIRE STORM carbide tipped
wood drill bits can be completely rebuilt and repaired. "Wood Bore".

Carbide Tip Wood Core Drill
for large deep hole drilling!
2" to 24" diameters
any depths!

Turf Drills
For golf courses, sports stadiums, landscaping.
specially manufactured for each need.

1" capacity Reversible

price cannot be advertised, call for substantial discounts!
Model No. ADV -1903

Ideal for drilling wood in marine timbers, underwater use and railroad repair work
Thrust bearing support for long life and efficient operation
Lever throttle and durable spur gearing
Breast plate and dead handle included
Includes threaded exhaust port
Use underwater with Air Tool Line Conditioner
Accessories and wood boring drill bits from 1/2" dia. to 4" dia. in lengths from 12" to 124"

Model ADV-1903 - 1" dia. capacity in wood
Capacity in wood: 1" Diameter
Reversible: Yes
Power: 2 HP
Chuck Style: 1/2" Wood boring
Spindle: Stub Taper
Free Speed: 750 RPM
Recommended Hose Size: 1/2"
Overall Height: 17-1/2"
Weight: 14-1/2 lbs.
Air Inlet Thread: 1/2" ID
Air Exhaust Thread : 1/2" NPT
Air Consumption at 90 PSI : 39 CFM

Milwaukee 3/4 chuck HD drill for timber bits.
mt3

price cannot be advertised, call for substantial discounts!
3/4in. capacity in steel
For drilling holes of all sizes in wood frame construction
#3 Jacobs taper spindle
Triple gear reduction transmits more torque
Extra-long switch handle and pipe handle afford
maximum leverage for drilling and reaming large holes
Amps
10
Chuck Size (in.)
3/4
Speed (RPM)
350
Side Handle
Yes
Keyless Chuck
No
Variable Speed
No
Case Included
No
Manufacturer Warranty
5 year limited warranty
Ship Weight
23.56 lbs

Wood Augers
Treated Wood and Timbers.

Wood augers that will give you maximum productivity and get the job done!

Over 31 Years of Manufacturing and Distributing Quality Wood Tools!
World Wide

Drill Drives and Power Drives
Model No.'s:
(with Torque Control)

Wood AugersTreated Wood and Timbers.

Wood augers that will give you maximum productivity and get the job done!Over 31 Years of Manufacturing and Distributing Quality Wood Tools!World Wide

Drill Drives and Power DrivesModel No.'s: (with Torque Control)

Wood Augers
Treated Wood and Timbers.

Wood augers that will give you maximum productivity and get the job done!

Over 31 Years of Manufacturing and Distributing Quality Wood Tools!
World Wide

Drill Drives and Power Drives
Model No.'s:
(with Torque Control)