Masonry Drill Bits.
Sds plus®, sds MAX®, percussion, Splined hammer,
A & B taper percussion. Standard & Metric. Custom tooling Manufactured in the USA.
For all construction or demolition applications.
Concrete percussion hammer, Carbide core Plate and Milling Cutters.metric bits-standard-long length bits-large diameter masonry drill bits.
custom tooling made to your specifications. Demolition reconstruction.
Specialized manufactured drill bits for unusual applications.
Long lengths as well as large diameters.
American Made!
Diamond blades /concrete /masonry /tooling.
Standard, metric, and fractional.
ENGINEERS WILL ASSIST WITH ALL QUESTIONS.
If it's one or more, Call or E-mail us for price and delivery.
Call or write us for pricing . Tooling Manufactured in the USA!
Custom manufactured tooling, fractional and Metric for your special needs.
lowest prices and highest quality! Discounts for quantity purchase.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
Pneumatic - Hydraulic -Electric -drill Motors
Tools manufactured designed
for rugged heavy duty us in all conditions. The specialized
alloyed 4140 through hardened steels and c-2/c-3 carbide
are designed for continuous use in all the hardest materials
or concrete. Manufactured in fractional metric sizes.
Larger diameter and length tooling custom
manufactured to your needs.
Masonry Fast Spiral drill bit"
masonry/concrete drills
1/8" to 1"dia.
up to 18" lengths.
These drill bits have a proven Fast Spiral Bit design, combined
with a special carbide tip and a tough steel alloy body, allows the
Fast Spiral Bit to drill quickly and cleanly using a standard rotary drill motor.
Flute design that allows for less heat buildup, providing the longest bit life possible.
Call or E Mail for pricing.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
American Manufactured Masonry Drills.
Masonry Uni-Bit
 The ultra heavy duty multi-purpose bit
masonry, concrete, Granite, brick, block, tile,
marble, slate, fiberglass, steel, iron,
aluminum, wood, and plastic.
1/8" to 1/2" diameters
Titanium-Tungsten-Carbide
all purpose carbide drills
This bit is the best for Granite as well as the hardest materials!
"Masonry Hammer Percussion"
masonry/concrete drills
1/8" to 1-1/2" diameters: metric sizes also.
(From 2-3/4" to 84"+) lengths
Metric sizes 5mm to 66mm
(custom diameters and Lengths Mfg.)
Straight Shank Hammer Bits are designed for use in hard hitting hammer drills
that utilize a 3-jawed, Jacob’s type chuck, feature an extra tough carbide tip that gives outstanding performance in the roughest
drilling applications. The heat-treated and surface hardened alloy body, coupled with
an extra tough percussion carbide tip, is designed to stay sharper longer.
The shank design allows for easy factory sharpening to help extend the life of the bit.
SDS/PLUS"®
masonry/concrete drills
3/16" to 1-1/8"diameters or(4 mm to 28 mm).
up to 38"+ lengths.
Metric sizes 5mm to 66mm (custom diameters and Lengths Mfg.)
The SDS Plus Carbide Tipped Drill Bit feature the SDS plus versatile Slot Drive System that fits
all rotary hammers that specify an SDS Plus Masonry Shank.
Positive drive slots deliver maximum drilling torque and maximum hammering
energy for faster drilling. We combined the “Ultra Flute”, an asymmetrical spiral
design with the popular SDS Plus Shank to achieve a combination
that makes our the fastest drilling carbide-tipped hammer bit of its type!
Masonry/Concrete "SDS/MAX® "
masonry/concrete drills
Designed with Five carbide tips.
3/8" to 1-1/2"diameters and metric.
specials up to 72-1/2 " + lengths.
Metric sizes 5mm to 66mm
(custom diameters and Lengths Mfg.) SDS Max Drill Bits are Carbide Bits that have
a heavy duty slot drive system that is designed to maximizes the performance.
SDS Max Drill Bits will fit any rotary hammer that is designed with an SDS Max ® drive system.
has three positive drive slots and two ball retainer slots incorporated into the SDS Max ® shank design.
The design in the SDS Max Carbide Tipped Drill Bits allow the operator to drill large diameter holes with ease.
The SDS Max Masonry Drill Bits are ® 5/8” diameter or larger are equipped with a multi-cutter tip design.
Masonry/Concrete " SPLINE DRIVE"
Hammer Drills
3/8" to 1-1/2"diameter standard and metric sizes also,
specials up to 108"+ lengths.
Metric sizes 5mm to 66mm
(custom diameters and Lengths Mfg.)
The Spline Hammer Masonry Bits feature a carbide tipped and spline drive. Spline Drive drill bits
are held to exacting tolerances to assure perfect fit as well as maximum impact and torque transmission.
Masonry Spline Drill Bits - are rotary/percussion/hammer carbide tipped are industrial drills that are milled
from a single piece of steel and are designed with maximum strength to provide maximum life.
Call or E Mail for pricing.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
"EXTRA LONG "
1/4" to 1-1/2"dia.
UP TO 108" lengths
Metric sizes 5mm to 66mm
(custom diameters and Lengths Mfg.)
Carbide Tipped long Bell Hanger Bits or Installer Bits are used in small wire installation
or fishing wire threw holes that have just been drilled. These installer bits are carbide tipped.
The Bell Hanger Drill Bits are specifically designed for small wire installation applications.
Telephone wire installation, security alarm installation, fire alarm installation, cable wire installation,
data network wire installation, electricians and other professionals. All use these unique carbide tipped installer
bits to drill holes through walls, studs and other obstacles and then use the unique threw hole, attaches a wire to the
installer bit and fishes the small wire back through the drilled hole with ease.
"Combination Drills / Counter Sink"
Hurricane Shutter Installation anchors
 
1/4 pilot with 1/2 counter bore 3-1/2" and 5" lengths. Protecting your home, property, business or loved one, take the Guesswork out of Hurricane Shutter Anchors,
Storm Shutter Anchors, and Security Shutter Anchor Installation...Hurricane Anchor Bits are
Combination drill bits designed for anchors. These bits are designed for Hurricane Shutter Anchors
or Hurricane Anchors and are equipped with a carbide-tipped pilot drill bit, a carbide tipped counter bore, depth gage collar.
Reliable Hurricane Shutter Installation is easy when Hurricane Anchors are set to same depth.
To install hurricane anchors just adjust to counter sinking depth settings. Once the Hurricane Shutter Anchors depth
is adjusted, duplicate holes with exactly the same depth can be quickly drilled, one after another! In just one easy step
Hurricane Shutter Anchors Bits or Hurricane Anchor Bits will repeatedly drill holes for hurricane anchors lead shields,
as well as a small hole to allow clearance for the screw or bolt to pass through.
Carbide Tipped "Earth Auger "
3" dia. to 30 " + lengths, 1/2 SHANK
Termite bait station installation and soil sampling has never been easier. The Carbide Tipped Earth Auger
is ideal for termite bait station installation or soil sampling.
Armed with a carbide tipped pilot and a
carbide tipped auger flute cutter you will drill dozens if not hundreds of holes with this
carbide tipped earth auger. The Carbide Tipped Earth Auger is equipped
with a standard 7/16” Hex shank that fits both quick change chucks and 1/2” Jacobs® Style Chucks.
Standard Shank
5/32",1/4"dia.
anchor/screw installations.
SDS Plus Tapcon Carbide Tipped Drill Bits are rotary hammer carbide tipped. They are specifically designed
for use with Tapcon® concrete screw anchors. Each SDS Plus Tapcon Carbide Tipped Drill Bit are precisely sized to match
the required tolerances necessary to achieve maximum holding power from self threading concrete screws. These SDS Plus
Tapcon carbide tipped drill bits have a 5/16” hex, immediately below the shank, that fits directly into the concrete screw anchor installation tool.
SDS Plus Tapcon - SDS Plus Carbide Tipped Masonry Drill Bits are designed for use with Tapcon® type anchoring systems that utilize an anchor
screw with a self tapping thread. Constructed of hardened alloy steel, a close tolerance carbide tip and a SDS-Plus/ Hex style shank,
the SDS Plus Tapcon Bit will provide long life and superior performance.
The SDS Plus Tapcon Drill Bits are available by the piece (Standard Pack) or quantities of 10 per package (Pro-Pack).
Call or E Mail for pricing.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
A TAPER or B TAPER"
Hammer drills
(A) Taper 3/16"to 7/8"dia.
(B) Taper 7/16" to 1-1/8"dia.
A and B Taper style drill bits are made especially to fit our high quality A Taper and B Taper adapters.
The smaller A Taper shanks are intended for bit diameters from 3/16" to 7/8". B Taper shanks are most effective
in large capacity rotary / percussion hammers and are available in sizes from 7/16" to 1-1/8" diameters.
Taper hammer drills are produced from high grade steel that is heat treated and tempered to provide the longest
drilling life possible. These bits, A Taper and B Taper have a asymmetrical spiral flute design,
allows for efficient dust removal and cooler operating temperatures.
"A or B TAPER ADAPTERS"
For SDS & Spline.
Advantage Drills provides a complete line of drill bit accessories of taper chuck adapters for A & B Taper
carbide tipped drill bits plus a complete line of Taper carbide tipped drill bits that fit most types of current production
or even discontinued rotary/percussion hammer models. When A or B Taper Adapters are combined with A or B Taper
carbide tipped drill bits, costs are held to a minimum.
The common problem of having too many carbide tipped drill bits of one size and too few of another is eliminated.
A and B Taper Adapters are produced from high quality alloy steel and are heat treated for extra long life.
A drift pin is provided with each adapter at no charge. The drift pin is used to remove A or B Taper carbide tipped drill
bits from the adapters.
Due to changing models and additions to power tool lines, other A and B Adapters may be available but are not shown.
"HAMMER CORE"
1"to 6" Diameters
12 And 18 Inch Lengths.
sds-plus, sds-max, spline, standard shank.
Rotary Core are a carbide tipped core bit used in standard rotary drill motors.
Rotary Core Bits provide an extremely smooth cutting action and a clean finished hole.
Because of the negative setting of the carbide cutting teeth, Rotary Core Drills can cut through the toughest
and hardest of aggregate in any type of concrete. The Rotary Core Drill sizes 5/8" Diameter to 1-3/8" Diameter
are milled from a single piece of steel.
Rotary Core sizes 1-1/2" Diameter and over are manufactured with a replaceable threaded shank.
IMPORTANT NOTE:
The Rotary Core Drill can be used in any 1/2” capacity or larger drill motor equipped
with a three jaw chuck and a rated no-load speed of 400 R.P.M.LOADS. to 1,200 R.P.M.LOADS.. This includes most combination hammer drills.
When using a combination hammer drill ensure the selector switch is in the rotary only position!
Call or E Mail for pricing.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
"Hard Head"
1-3/4, 2, 2-1/2, 3 diameters up to 24 " lengths.
sds-plus, sds-max, spline, standard shank For drilling deep holes without a core.
"HAMMER CORE SHANK ADAPTERS "
to connect 5/8-11, 3/4-10, 1-1/4-7 Thread
(for most all masonry motors)
have a replaceable 3/4-10 threaded coupler for an extra long working life.
You need only replace the threaded adapter if it should wear or break. Due to changes and additions in power tool models,
other adapters may be available, but not listed in this catalog.
"Screw Installation Kits "
"ROTARY CORE "
5/8" to 6"dia.
12" to 18" lengths.
sds-plus, sds max, standard shank.
Rotary Core Drill Bits are a carbide tipped core bit used in standard rotary drill motors.
Rotary Core Drills provide an extremely smooth cutting action and a clean finished hole.
Because of the negative setting of the carbide cutting teeth, Rotary Core can cut through
the toughest and hardest of aggregate in any type of concrete.
The Rotary Core Drill sizes 5/8" Diameter to 1-3/8" Diameter are milled from a single piece of steel.
Rotary Core Drill sizes 1-1/2" Diameter and over are manufactured with a replaceable threaded shank
IMPORTANT NOTE:
The Rotary Core Drills can be used in any 1/2” capacity or larger drill motor equipped with a three jaw chuck and
a rated no-load speed of 400 R.P.M.LOADS. to 1,200 R.P.M.LOADS. This includes most combination hammer drills.
When using a combination hammer drill ensure the selector switch is in the rotary only position!
Call or E Mail for pricing.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
"REBAR CUTTERS"
Standard and SDS Shank
Will cut through the toughest steel or rebar.
1/2" to 3 " diameters.
12" AND 18 " lengths.
When drilling with a rotary hammer and a carbide tipped (percussion) bit, the bit must be
quickly stopped when the drill bit tip comes in contact with steel reinforcing bars or wire mesh.
(If the tool is not stopped any carbide-tipped hammer drill bit will fail.)
Using a standard 1/2" chuck capacity rotary drill with the rebar cutter inserted into the chuck,
place the rebar cutter into the hole and drill through the embedded rebar or wire by maintaining an even and constant pressure.
After drilling through the rebar or wire, remove the debris from the hole and continue drilling with the rotary hammer and carbide-tipped drill bit.
"MILLING CUTTER"
Designed to cut through
concrete and wire mesh or rebar.
1/2" to 6" diameters.4-1/2"dia.
up to 14-3/4 " length.
When are Carbide-Tipped Core Drill Bits the best alternative to Diamond Core Drill Bits for a particular application?
In general when evaluating the advantages of using core drill bits carbide or diamond drill bits,
consider the 80/20 rule. 80% of applications are suitable for wet diamond core drill and may not be significantly improved by utilizing carbide core drill bits.
20% of applications, require other alternative solutions and WET/DRY CARBIDE-TIPPED CORE DRILL BITS
offer significant advantages in such applications. What are these applications?
When encountering applications requiring core drill bits to drill through multiple layers of materials stacked together, such as wood,
steel, concrete, rebar and a host of others material combinations, diamond drill bits performance can be hindered or completely prohibited.
The Best & Available alternative is the WET/DRY CARBIDE-TIPPED CORE DRILL BITS, which are designed to solve these difficult jobs
encountered by the drilling professional. Can Carbide Core Drill Bits and Diamond Core Drill Bits work together?
Yes, professional core drillers in a variety of situations effectively use both Diamond Drill Bits and Carbide Core Drill Bits to complete a project.
Whether starting a hole, completing a hole, or anywhere in between, carbide core drill bits and diamond core
drill bits both make significant contributions. Example: starting a hole into concrete only to encounter plate steel an inch into the hole.
Switch to carbide core drill bits, drill through the steel, then switch back to the diamond drill bits until the next hindrance to the diamond bit is encountered
Call or E Mail for pricing.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
"PLATE CUTTER"
Carbide or Diamond
Designed to cut through concrete
and wire mesh and rebar.
3/8" to 6"dia.
13-1/2 & 24" lengths.
Designed for use in a drill rig, the Plate Cutter is the ideal choice when a combination of concrete and steel is being drilled.
Steel plate, embedded rebar, or even wire mesh, are not a problem for the Plate Cutter. This series can be used wet with a small amount
of water or even dry. The Plate Cutter can be completely rebuilt and unlike fragile diamond drills, the Plate Cutter will with stand rough usage.
"CARPET STUBBY"
1/8"dia
The Carpet Stubby (Tack Strip Installer Bits) carbide tipped drill bits will drill concrete, wood ,or even terrazzo flooring.
The Carpet Stubby (Tack Strip Installer Bits) is used to drill a hole that allows the installer to place
a nail through the carpet tack strip into the floor underneath.
These Tack Strip Installer Bits or Carpet Stubby Bits combine proper nail size and
correct diameter hole to help preventing carpet tack strip pullout.
"CRUCIFORM"
1-1/2" to 6"dia.
For the aggressive deep holes!
Call or E Mail for pricing.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
TRICONE ROCK MILLING BITS
Carbide Tipped All Sizes. I.A.D.C. Code.
Specifications needed must call for pricing.
 
  
Whirley concrete bits
"DIAMOND CORE " CARBIDE & DIAMOND SEGMENTED.
wet and dry.
1/2" to 48" diameters.
standard lengths 13-3/4" to 48".
SPECIAL LENGTHS AND SIZES CUSTOM MANUFACTURED.
 
"CORE RIGS "
&
GAS POWERED MOTORS.
To fit any application!
 
"FORGED HAMMER "
MASONRY / ASPHALT
SDS PLUS*SDS MAX* SPLINE AND ROUND SHANK
        
COUNTER BORES
2" diameter.
special sizes, custom manufactured.
Railroad tie counter bore are used to anchor concrete railroad crossing pads to their underlying wooden cross ties
using a trox bolt ® head type anchor bolt. The Trox bolt head must be installed below the surface of the concrete
to prevent damage to vehicle tires. In colder climates where snow removal is necessary.
trox bolt ® countersinking process prevents snowplow blades from shearing off the bolt head.
Railroad tie counter bore, a counter bore, countersinks a two-inch hole into concrete which was a difficult procedure
until the advent of the railroad tie counter bore. Powered by an electric, hydraulic,
or air powered rotary/percussion hammer, railroad tie counter bore allows the operator to countersink
any trox bolt head to the proper depth quickly and easily!
Call or E Mail for pricing.
Phone: (407)478-2487
Fax: (407) 678-7414 (24 hrs)
(9:00 AM TO 5:00 PM EST)
E: Mail
We also manufacture specialty custom tooling
for special applications and jobs.
All diameters and lengths.
Continuous, Turbo, and segmented
Diamond Blades
 
MORE DIAMOND BLADES
SDS Plus / SDS Max / Spline
A and B Tapered / ratio / hex
masonry tools.
Standard, Metric and More.
(More Quality Bits and Tooling)
Metals Glass Woods Fiberglass Porcelain Composites
Concrete Tile Timber Stone Welding Alloys
for All Industry and Individuals.
Many types of tooling available.
A/B Taper shank, sds/MAX shank, sds PLUS shank, tapcon,
spline shank hammer, milling cutters. plate cutters, rebar cutting, cruciform tools.
For over thirty years, "Advantage Drills Incorporated", has been another one of the industry leaders for design, production, of carbide tipped drill bits and accessory items. We strive to supply the highest quality tooling, and maintain the best customer service and engineering, possible and that you receive
the Best American Made Products and Service.
Our dedication to research and development has produced many fine products, such as our line of carbide tipped wood boring drill bits. Research and development is an everyday part of our operation. In fact, we can produce one piece carbide tipped drill bits in lengths and diameters that other manufacturers simply cannot match. Our motto is, "If the law of physics allows it, We can Manufacturer it for you."
After years of testing custom manufacturing, refining, and listening to many professional industries like yours, we have help develop carbide tipped drill bits for boring long, large diameter holes that make all other drill bits in your tool inventories obsolete! Many milled out of single piece of hss steel, with custom designed high grade carbide cutting tips. You’ll have no doubt that our masonry and concrete are designed for the serious industrial craftsman,
productive manufacturer and repair engineers!Contributing to the lower cost-per-hole design of the carbide tipped drill bits can be re-sharpened, or even completely rebuilt if necessary. This gives the carbide tipped drill bits the ability to outlast ordinary carbon steel boring bits an average of 20 times to one, under normal conditions, dramatically cutting your yearly tooling expense! No more worrying about spot-welded fluting coming loose half way through a hole, stopping your job dead in its tracks! No more wasted time or money having a longer shank welded onto your present bit in order to do a job! "Advantage Drills Incorporated" carbide tipped masonry drill bits come in standard sizes up to four feet in length, with even custom manufacture larger sizes available for your specific needs! No more time wasted clearing your holes, because the fluting on your present bits isn’t long enough or proper flute relief for the holes you’re drilling.
Need a longer bit? Give us a call! Our custom designed carbide tipped drill bits drill a truer hole better and faster than your present drill bits!
You will be dealing with one of the most respected manufacturers/ distributors of carbide-tipped drill bits in the industry. We’ve been in business for over 30 years, Many of you have been in the concrete Industry for years, and we recognize many of your needs due to the vast number of you that we have listened to and aided in helping save thousands of dollars and giving you tooling that works for your specific needs. But, if you happen to run across a drilling problem, please give us a call, you will be talking to an engineer that has been in this specific industry for years! There’s a good chance we can help, and you’ll find we are sincere in being an asset to you and your needs!
If you don't see it, just call us and ask!
We guarantee the lowest prices and best quality!
E mail or Call Us!
Phone:(407)478-2487
Fax:(407)678-7414 ( 24 hrs )
(9:00 AM TO 5:00 PM EST)
masonry drill bits, sds plus, sds max, hammer drills, long bits, tungsten carbide, metric sds, rotary hammer, American Made spline rotary hammers, milwaukee, anchors, heavy duty concrete tools, diamond core bits, concrete chisel, carbide-tipped, carbide tip, SDS, sds plus, sds, sds/MAX. concrete, tapcon, spline drive, milling cutters, diamond core, A Taper, B Taper, sds/MAX hammer, sds/plus, spline milling cutters.
Home
other links masonry Drills.
wikipedia.
Definitions
|
