" Power Plus Annihilator "
powerful heavy duty
Carbide Tip
Standard Diameters
1/2 *9/16 *11/16 *13/16
15/16 * 1 * 1-1/16 *
1-1/8 * 1-1/4 * 1-3/8
1-1/2 * 1-5/8 * 1-3/4
Up to 3 diameters Standard Lengths.
12 * 18 * 24 * 36 * 48 Lengths
custom manufactured up to 184 plus lengths.
(click on image for sizes)


carbide tipped with hardened L-5 spur,
Timber Drills.

Soft or hard woods, fiberglass, composites,
heavy green woods, For forestry, Home Builders, Timber Framing,
Glue lam, Truss Construction, Treated Woods, Boat Building,
Sea Wall Construction, Underwater Construction, wood and fiberglass
Utility poles, Landscaping, Bridge Construction. Heavy Equipment,
Matt Construction, and more.
No run out or wandering. Clean Entry and Exits.
Use with electric air / gas powered drill motors
lead screw, carbide, and shank are replaceable
and can be completely rebuilt

Socket, SDS, Spline & Standard Shanks.
The Power Plus annihilator
WILL out-perform all others!

The Annihilators are carbide tipped drill bits that have a carbide-tipped cutting tip combined with a hardened steel cutting edge. This allows the Annihilator carbide tipped wood drill bits to bore holes in all types of wood quickly, leaving little or no residue. A truly clean, smooth hole is produced.
The carbide tipped drill bits requires less torque to operate and can be used with electric, air, or gasoline powered drill motors and impact wrenches. The carbide cutter is brazed onto the steel body and the hardened steel cutting edge can be sharpened. The lead screw, shank, and carbide cutter are replaceable allowing thee Annihilator carbide tipped  drill bits to be completely rebuilt.

Carbide Counter Bores Diameters
7/16 * 5/8 * 3/4 * 1-1/4 * 1-1/2 * 2 * 2-1/2 * 3 * 3-1/2
Hex or round Shanks,
1/2, 5/8, 3/4, (Round), (socket, SDS, or spline)
special custom sizes made for your applications!



All Diameters- 1" and up
custom carbide  counter sink
(below)



"Marine Shark bits"
Call for price.




Standard High Speed Steel
 hand brace bits / ship auger / pole bits
electricians bits / utility bits
and all other styles.
All styles of augers3/8" to 2".
Single and double spurred, bare foot and more,
available in all sizes and lengths.
Call us for pricing and availability.


 

For over thirty years, "Advantage Drills Incorporated", has been another one of the industry leaders for design, production, of carbide tipped drill bits and accessory items. We strive to supply the highest quality tooling, and maintain the best customer service and engineering, possible and that you receive the Best American Made Products and Service. Our dedication to research and development has produced many fine products, such as our line of carbide tipped wood boring Augers. Research and development is an everyday part of our operation. In fact, we can produce one piece carbide tipped Augers in lengths and diameters that other manufacturers simply cannot match.
"If the laws of physics allow it, We can Manufacturer it for you."

    After years of testing custom manufacturing, refining, and listening to many professional industries like yours, we have help develop carbide tipped Augers for boring long, large diameter holes that make all other drill bits in your tool inventories obsolete! Many milled out of single piece of hss steel, with custom designed heavy duty lead screws and a specially modified high grade carbide cutting tips. You’ll have no doubt that our wood boring carbide tipped drill bits are designed for the serious industrial wood craftsman, productive manufacturer and repair engineers!
 

    Contributing to the lower cost-per-hole design of the carbide tipped wood boring Augers can be re-sharpened, or even completely rebuilt if necessary. This gives the carbide tipped wood boring drill bits the ability to outlast ordinary carbon steel wood boring bits an average of one hundred times to one, under normal conditions, dramatically cutting your yearly tooling expense!

    No more worrying about spot-welded fluting coming loose half way through a hole, stopping your job dead in its tracks!

No more wasted time or money having a longer shank welded onto your present bit in order to do a job! "Advantage Drills Incorporated" carbide tipped wood boring Augers come in standard sizes up to four feet in length, with even custom manufacture larger sizes available for your specific needs! No more time wasted clearing your holes, particularly in hard woods and treated lumber and glulam, because the fluting on your present bits isn’t long enough or proper flute relief for the holes you’re drilling.

     The four-foot carbide tipped wood Augers comes with a standard 44" of fluting, in diameters of up to 1 ¾". Need a longer bit? Give us a call!

Our custom designed lead screw pulls the carbide tipped wood Augers quickly through the wood, while drilling a truer hole without run out or blow out than your present drill bits do!

You will be dealing with one of the most respected manufacturers/ distributors of carbide-tipped Augers in the industry. We’ve been in business for over 30 years, Many of you have been in the Log Home -Timber Industry for years, and we recognize many of your needs due to the vast number of you that we have listened to and aided in helping save thousands of dollars and giving you tooling that works for your specific needs. But, if you happen to run across a drilling problem, please give us a call, you will be talking to an engineer that has been in this specific industry for years!  There’s a good chance we can help, and you’ll find  we are sincere in being an asset to you and your needs!

If you don't see it, just call us and ask!
 

(click on image for sizes)


Drill flute design,
gives the Aggressor the ability to drill faster
than standard steel augers.
 Milled from solid high alloy steel.
Because of it's rugged construction and tip design.
The Ultimate Aggressor is able to accept
extreme torque and high R.P.M.LOADS. LOADS. loads.
Standard sizes available.
Diameters:
* 9/16 * 11/16 * 13/16 * 15/16  * 1
* 1-1/16 * 1-1/8 * 1-1/4 * 1-3/8 * 1-1/2 *
* 1-5/8 * 1-3/4 *
Standard Lengths.
12" * 18" * 24" * 36" * 48" * Lengths.
Custom manufactured up to 184 plus lengths
for treated wood or green lumber, or forestry
Socket, SDS, spline, standard shanks.

The unique power flute design and the exclusive carbide tip incorporated into the design of the Aggressor carbide tipped drill bits, allows them to drill faster than ordinary steel bits. The Aggressor carbide tipped wood drill bits are milled from a solid bar of steel to make it tougher and stronger than most conventional wood drilling bits. These are truly long lasting, heavy-duty carbide tipped wood drill bits that are able to accept the high torque load and high R.P.M.LOADS. level generated by the most powerful impact wrenches and drill motors. Hydraulic tools like the Stanley ID-04 “Yellow Jacket” impact wrench, the Racine HIW-716 and the Fairmount H8508 impact wrench will provide improved hole drilling performance when used with the Aggressor carbide tipped wood drill bits. The Aggressor carbide tipped drill bits also works well in heavy-duty electric, pneumatic, and gas powered drills. The Aggressor carbide tipped drill bits are fully reversible, and comes in standard diameters from 9/16” up to 1-1/8”, and in standard lengths from 12” to 48”. The shank is a standard 7/16” or 5/8” hex, but can be customized to fit most power tools.
(Tie Bits)
Railroad Tie Auger Bits.
Carbide Tipped.
for wood and fiberglass railroad ties
and heavy woods.
Diameters
7/16 * 1/2 * 9/16 * 5/8
11/16 * 3/4 * 13/16
Lengths
9-1/2 * 12 * 18 * standard.
Socket, SDS, Splined Standard Shanks!


Optional Tip
Special sizes made!
For Railroad Ties and heavy wood timbers
For Railroad Ties and heavy timbers
Carbide-tipped Railroad Tie bits are especially
designed for drilling all types of wooden railroad ties, cross-ties, and pressure treated lumber.
These Railroad tie bits offers rapid chip evacuation due to special fluting that provides a large chip
storage area and prevents clogging. The high quality carbide tip, available in a spear point (90°) design
will drill into the hardest of woods.
Simple put our Railroad Tie Bits are designed for drilling railroad ties.



Ideal for drilling railroad cross ties, landscape timbers, marine piles, and thick salt treated posts.
features a razor sharp carbide edge on a single spiral hollow flute bit that will cut quickly and cleanly effectively removing cutting debris.  The design also prevents thermal buildup thus preventing melting of the work surface. The RAZZOR can be sharpened and completely rebuilt if necessary. The unique point geometry and hollow flute design is self feeding without the aid of a lead screw. The RAILROAD TIE BORE BIT makes an excellent exit hole while keeping "blowout" to a minimum. The RAILROAD TIE BORE BIT can be provided with various shank configurations, the most common is the 1/2" Round Shank with 0, 1 or 3 flats. This allows the drill bit to be chucked into a ½" Jacobs Chuck or larger drill. Made from high quality American tools steel on precision CNC grinders. A "must have" for any job that requires a through hole in a thick timber of spikes or bolts. sold in production units only.
min(250 pc)

.
Timber Wood Auger
 30" and 40 Lengths only.
From 9/16 to 1-1/2 Diameters.



Carbide Counter Sinks Custom manufactured.
large hole counter bores.
any diameter or depth.



FIRE STORM WOOD AUGER
Fire Storm double spur for general purpose
medium to heavy duty use!

(click on image for sizes)


Diameters:
*9/16 *11/16 *13/16 *15/16 * 1-1/16
Lengths
12 * 18 * 24 * 36 * 48
shanks 7/16 hex or 5/8 hex
special sizes and lengths available on request.

The FIRE STORM carbide tipped drill bits
are general purpose bits, medium to heavy-duty auger style wood boring  pole bit.
These wood drill bits are milled from a single piece of steel creating a solid center and a truly unique flute design. This combination enables these carbide tipped wood drill bits to outperform and out last any ordinary steel auger pole bits.

        The FIRE STORM features a patented double spur, carbide tip drill bit configuration and proven power-auger flute design. These carbide tipped  drill bits are designed to produce numerous straight holes and is self-feeding.

 The FIRE STORM works equally well with newer hydraulic power tools that utilize a high torque, high R. P. M. design, or with older hydraulic tools that may develop slightly less torque and speed. The FIRE STORM carbide tipped wood drill bits can also be used with most heavy-duty electric, pneumatic, or gasoline powered drill motors or impact wrenches rated at 1/2" capacity or larger. Do not use reverse drilling when removing,the FIRE STORM is NOT a reversible bit. 
 FIRE STORM carbide tipped wood drill bits can be completely rebuilt and repaired. "Wood Bore".

Carbide Tip Core Drill Drills
for large deep hole drilling!
2" to 24" diameters
any depth!



Turf Drills
For golf courses, sports stadiums, landscaping.
specially manufactured for each need.



Marine
( under water):
Coring and drilling bits


Ice and Snow drills